Your Best Partner for Fiber Optic Solutions

10G XFP

10G XFP module is one of the most popular 10Gigabit fiber optic transceivers. It supports transmitting distance from 300M (SR), 10KM (LR), 40Km (ER) up to 80Km. SM and MM, and dual fiber and single fiber are optional. Comparing with other 10G modules such as Xenpak and X2, XFP interface is more competitive for 10 Gigabit Ethernet and packet over-Sonet applications. Sopto XFP modules are built in diagnostic functions and compatible with RoHS. Besides Sopto offers 10G XFP not only with common temperature range but also industrial temperature range.





WDM XFP
WDM XFP enables higher slot densities and greater bandwidth, and transmits and receives optical data over single fiber for link length of 10km up to 80km transmission on SMF. Sopto WDM XFP modules as single mode LC receptacle bi-directional transceivers are designed expressly for high-speed communication applications that require rates up to 10.7Gb/s. WDM XFP solution is compliant with the IEEE803.3ae 10Gbase-Bx, XFPMSA, FC_PI_4REV7.0, XFP MSA with duplex LC connector and so on. BIDI XFP modules are widely used in 10GBASE-BX 10.3125 GB/s Ethernet, 10GBASE-BX 9.953 GB/s Ethernet and SONET OC-192 & SDH STM I-64.1 applications.


CWDM XFP
CWDM XFP supplier, SOPTO provides CWDM XFP transceivers all over the world with high quality and low price. CWDM XFP Transceivers are designed for 10Gbps Fiber Channel and CWDM Networks applications. It works with ITU channel C-band EML CWDM DFB laser and a receiver with a PIN photodiode. Its transmission distance is up to 80km. The Digital diagnostics functions and standard transceiver serial ID information are available. CWDM XFP transceivers comply with optical devices of many brands such as Cisco, Huawei, Finisar etc.


 
DWDM XFP
SOPTO is a high quality DWDM XFP Module Supplier. The XFP DWDM Transceivers series are available in standard ITU DWDM channels including 17-61 C - band. DWDM XFP Modules are designed for SONET OC-192&SDH STM 64 and DWDM network applications and the optical data communications distance reaches up to 120Km. Digital diagnostics functions and standard transceiver serial ID information are available according XFP MSA. SOPTO’s DWDM XFP transceivers also provide an enhanced monitoring interface, which lows real-time access to device operating parameters such as transceiver temperature, laser bias current, transmitted optical power, and received optical power and transceiver supply voltage.

 
Copyright © 2017 Fiber optic equipment manufacturer in China, SFP, FTTH, fiber converter, cable.