Your Best Partner for Fiber Optic Solutions

Where can I buy SFP+ direct attach twin-axial cable with low cost

SFP+ direct attach twin-axial cable with low cost. The Direct Attach Cables are the components (includes interface module on both ends) used for the interconnection between the network cards.

 

The Direct Attach Cables are mainly used in the stacked connection of the 10G Ethernet Switches, the interconnection between the TOR switches and servers, the fiber channel devices, the InfiniBand devices and the interconnection between the servers or the storage devices.

 

The SFP+ direct attach twin-axial cable is also called 10GSFP+ copper or 10GbE copper SFP+ cable. The Direct Attach Cables use the passive twinax cable components and connect with SFP+ module directly.

 

The SFP+ direct attach twin-axial cable has a cable with fixed length like 3m, 5m or 7m usually. It uses the SFP+ module with small volume and size so that it has the advantages of low power, low cost and low latency.

 

Sopto offers a series of SFP+ direct attach twinax cables with the length range from 0.5m to 12m, and passive and active are both available. Of course, their cables have a reasonable price. You could contact Rita via its website. She is the best!

SFP+ to SFP+ 10GB Copper 0.5M Passive Cable AWG24

SFP+ to SFP+ Passive Twinax Cable 50cm AWG30. The SPT-SFP+C05 (SFP+ to SFP+ 10GB Copper 0.5M Passive Cable AWG30) is compatible with all brands including Cisco, Juniper, HP, Extreme, Enterasys, brocade-foundry, H3C, Alcatel-lucent etc.

SFP+ to SFP+ 10GB Copper 10M Active Cable AWG28
SFP+ to SFP+ Active Twinax Cable 10m AWG28. The SPT-SFP+AC10(SFP+ to SFP+ 10GB Copper 10M Active Cable AWG28) is compatible with all brands including Cisco, Juniper, HP, Extreme, Enterasys, brocade-foundry, H3C, Alcatel-lucent etc.
SFP+ to SFP+ 10GB Copper 2M Passive Cable AWG24
SFP+ to SFP+ Passive Twinax Cable 2m AWG30. The SPT-SFP+C2 (SFP+ to SFP+ 10GB Copper 2M Passive Cable AWG30) is compatible with all brands including Cisco, Juniper, HP, Extreme, Enterasys, brocade-foundry, H3C, Alcatel-lucent etc.

Related Tutorials

The CX4 cable expand the transmission distance of signal

The CX4 cable expand the transmission distance of signal . Compared with the SFP cable, the 10Gbase-CX4 is the ideal choice for high-performance data center.   The CX4 cable has advantages of low-cost and no-additional delay in the short-distance connection. It is similar with the interconnection of InfiniBand to use the shielded twisted pair cable and the transmission distance of the XAUI signal ups to 15m.     If we increase the signal compensation, it will make each port cost range down to the lowest. The pin definition of the CX4 connector also provides a power supply pin.   We offer CX4 cable with photoelectric conversion circuit itself so that the transmission

SFP cable assemblies with competitive prices

SFP cable assemblies with competitive prices . We launched SFP cable assembly for the connection in a high-speed environment. The SFP cable assembly provides a low-cost solution for devices which usually only need the short-length components in the environment of the server racks and data files racks.   The SFP cable assembly doesn’t need the signal conversion or the media converter which will increase the cost greatly. And the fee reduction will not affect the integrity of the signal. Our fiber optic cable assembly includes fiber optic patch cords, fiber adapters, fiber optic attenuators, etc. and all is in accordance with the standard of the industry and the data transmission

The low-cost and low-delay SFP direct attach twin-axial cable for data center

The low-cost and low-delay SFP direct attach twin-axial cable for data center. The continuous innovation network technology and the increasing network application promote the rapid development of the network.   As the information data exchange processing and network equipment stored, the data center always faces the challenge of a high bandwidth, high reliability and low delay.     The SFP direct attach twin-axial cable adopts passive twin-axial cable assemblies and connects to the SFP module directly. The SFP direct attach twin-axial cable has a fixed length which usually is 3 meters, 5 meters or 7 meters. With the small size SFP module and small volume cable, Our SFP cable
Copyright © 2018 Fiber optic equipment manufacturer in China, SFP, FTTH, fiber converter, cable.