Your Best Partner for Fiber Optic Solutions

Twinax Cable

Sopto produces high performance twinax cables including active direct attached cables and passive direct attached cables. Our twinax cable production line contains SFP twinax, SFP+ cables so called 10G copper cables, direct attached QSFP cables, QSFP+ DAC cable, CX4 high-speed cables, Mini SAS cables, InfiniBand cables, XFP to XFP cables etc. AWG24, AWG28, AWG30 SFP cables and length of 0.5 meter, 1meter, 3meter, 5meter, 7meter, 10meter, and 12 meters 10G copper cables are available. These active SFP cables and passive SFP cables are widely applied to storage area networks, network attached storage and storage servers, data center cabling infrastructures, and high density connections between networking equipment. All kinds of high speed cables could be compatible with Cisco, Extreme, Juniper, H3C, Alcatel-Lucent, Foundry, Nortel, Fortigate and other third party equipment.
CX4 Cable

CX4 directly attached twinax cable assembliesare cost-effective copper cable solution for connections between processor nodes and high performance I/O nodes, such as storage devices, servers and switches. The transmitting distance is up to 15 meters. 

SFP+ Cables
The SFP+ to SFP+ twinax cable are high performance I/O solutions for 10 GB Ethernet and 10G Fiber Channel applications. SFP+ to SFP+ 10G Copper Twinax Cables are suitable for very short distances including 1M, 3M, 5m, 7M, 10M, 12M etc. and offer a highly cost-effective way to connect within racks and across adjacent racks. SFP+ copper modules allow hardware manufactures to achieve high port density, configurability and utilization at a very low cast and reduced power budget. The SFP+ to SFP+ high speed cable assemblies meets 10 Gigabit Ethernet, Fiber Channel and other industry standard requirements for performance and reliability.
XFP Cables

10G XFP Cables were developed to provide links for a wide range of 10Gb/s applications including standards such as OC192/STM-64, G.709, and 10 Gigabit Ethernet, 10G Fiber Channel, and other network solutions. Sopto XFP to XFP Cables is a low cost twinax cable solution. XFP directly attached twinax cable assemblies are prefect for very short distances including 1M, 1M, 5m, 7M, 10M, 11M etc. and offer a highly cost-effective way to connect within racks and across adjacent racks. Active cables and passive cables are available.

QSFP+ Cables

The QSFP+ Twinax cables support the bandwidth transmission as defined by IEEE 802.3ba (40 Gb/s) and Infiniband QDR (4x10 Gb/s per channel) specifications. QSFP+ to QSFP+ (Quad Small Form-factor Pluggable Plus) 40-Gigabit copper direct-attach cables and QSFP+ to 4SFP+ Twinax copper cables are suitable for very short distances and offer a highly cost-effective way to establish a link between QSFP+ ports of QSFP+ switches within racks and across adjacent racks. AWG30, AWG28 and AWG24 and lengths of 0.5/1/2/3/4/5/6/7 meter are available.

Mini SAS Cables

Product Description SOPTO’s external mini-SAS cable assemblies for not only high-speed serial I/O interfaces (1.5 to 3.0 Gb/s) but also higher speed signal speed requirements up to and including 6.0Gb/s per channel. Mini-SAS 8088-8088 cables with AWG 28 and AWG30 from 0.5 meter up to 12 meter are optional. Robust final test and quality systems assure high quality cable assemblies conforming to the high-speed electrical performance requirements in industry specifications.

Copyright © 2019 Fiber optic equipment manufacturer in China, SFP, FTTH, fiber converter, cable.