Your Best Partner for Fiber Optic Solutions

The QSFP+ to 4 SFP+ cable used for the 40G and 10G devices

The QSFP+ to 4 SFP+ cable used for the 40G and 10G devices. Our QSFP+ to SFP+ high-speed cable assembly is a cost-effective and high-speed connectivity solution for our customers to achieve the interconnection between the 40G device and the 10G device, such as the NIC/HBA/CAN, switches and the servers.

 

In a typical application, user uses these QSFP+ to SFP+ cables to realize the interconnection between the existing 40G QSFP+ port and 4 SFP+ ports.

 

QSFP+ to 4 SFP+ cable

 

The high-speed QSFP+ to SFP+ cable, which is in accordance with the requirement of SFF-8436 and SFF-8432, has a 40Gb/s QSFP+ interface on one end and four 10Gb/s SFP+ interfaces on another end.

 

We supply QSFP to 4 SFP+ cables with the lengths from 1m to 7m to realize the port conversion of switches simply and economically. The QSFP+ to 4 SFP+ cables is applied in the data center, switches and routers.

 

In addition, we offer CX4 cables, SFP cables, SFP+ cables, Mini SAS cables, XFP cables and QSFP+ cables for our customers.

QSFP+ to 4SFP+ passive cable AWG24,7M

QSFP+ to 4SFP+ passive cable 7meter 40G AWG24. Applications: Servers, Routers, Switches Applications. Networked storage systems, External storage systems. Data Center networking. InfiniBand Trade Association (IBTA) IEEE802.3ba. 40Gigabit Ethernet (40G BASE – CR4)

QSFP+ to 4SFP+ passive cable AWG24,5M
QSFP+ to 4SFP+ passive cable 5meter 40G AWG24. Sopto is reliable supplier of SPT-QSFP+/4SFP+C5 (QSFP+ to 4SFP+ 40GB Copper 5M Passive Cable AWG24). We test each piece of SPT-QSFP+/4SFP+C5 (QSFP+ to 4SFP+ 40GB Copper 5M Passive Cable AWG24) 40G Copper Twinax Cable before shipment to ensure the SPT-QSFP+/4SFP+C5 (QSFP+ to 4SFP+ 40GB Copper 5M Passive Cable AWG24) can work in your system without any problems.
QSFP+ to 4SFP+ passive cable AWG24,3M
QSFP+ to 4SFP+ passive cable 3meter AWG24. The SPT-QSFP+/4SFP+C3 (QSFP+ to 4SFP+ passive cable AWG24, 3meter) is compatible with all brands including Cisco, Juniper, HP, Extreme, Enterasys, brocade-foundry, H3C, Alcatel-lucent etc.

Related Tutorials

The CX4 cable expand the transmission distance of signal

The CX4 cable expand the transmission distance of signal . Compared with the SFP cable, the 10Gbase-CX4 is the ideal choice for high-performance data center.   The CX4 cable has advantages of low-cost and no-additional delay in the short-distance connection. It is similar with the interconnection of InfiniBand to use the shielded twisted pair cable and the transmission distance of the XAUI signal ups to 15m.     If we increase the signal compensation, it will make each port cost range down to the lowest. The pin definition of the CX4 connector also provides a power supply pin.   We offer CX4 cable with photoelectric conversion circuit itself so that the transmission

SFP cable assemblies with competitive prices

SFP cable assemblies with competitive prices . We launched SFP cable assembly for the connection in a high-speed environment. The SFP cable assembly provides a low-cost solution for devices which usually only need the short-length components in the environment of the server racks and data files racks.   The SFP cable assembly doesn’t need the signal conversion or the media converter which will increase the cost greatly. And the fee reduction will not affect the integrity of the signal. Our fiber optic cable assembly includes fiber optic patch cords, fiber adapters, fiber optic attenuators, etc. and all is in accordance with the standard of the industry and the data transmission

The low-cost and low-delay SFP direct attach twin-axial cable for data center

The low-cost and low-delay SFP direct attach twin-axial cable for data center. The continuous innovation network technology and the increasing network application promote the rapid development of the network.   As the information data exchange processing and network equipment stored, the data center always faces the challenge of a high bandwidth, high reliability and low delay.     The SFP direct attach twin-axial cable adopts passive twin-axial cable assemblies and connects to the SFP module directly. The SFP direct attach twin-axial cable has a fixed length which usually is 3 meters, 5 meters or 7 meters. With the small size SFP module and small volume cable, Our SFP cable
Copyright © 2019 Fiber optic equipment manufacturer in China, SFP, FTTH, fiber converter, cable.