Your Best Partner for Fiber Optic Solutions

The most popular cables based on Gigabit Ethernet Application

The most popular cables based on Gigabit Ethernet Application. The Ethernet protocol is a group LAN protocol defined by the IEEE 802.3 standard. Gigabit Ethernet or 1 GigE protocol is based on the Ethernet protocol, whose speed is increased 10 times based on the fast Ethernet.

 

Due to its shorter data frame, the carrier extension is added. As a complement of the IEEE 802.3 standard, the Gigabit Ethernet is released by the IEEE 802.3z and the 802.3a.

 

With the appearance and development of 1 Gigabit Ethernet, all kind of related products emerge as required. And the Sopto’s SFP cables and Gigabit PCI Cards are the most widely used.

 

The SFP cable which compatible with many famous manufactures, such as Cisco, Huawei, HP, etc, is the first generation product of Sopto. With the increased technology, the price of Sopto’s SFP cable is lower and lower.

 

So many operators choose the Sopto’s products not only for its low price, but also for its good after-sales and quality certifications.

SFP+ to SFP+ 10GB Copper 0.5M Passive Cable AWG24

SFP+ to SFP+ Passive Twinax Cable 50cm AWG24. Sopto is your reliable supplier of SPT-SFP+C05 (SFP+ to SFP+ 10GB Copper 0.5M Passive Cable AWG30). We test each piece of SPT-SFP+C05 (SFP+ to SFP+ 10GB Copper 0.5M Passive Cable AWG30) 10G Copper SFP+ to SFP+ Twinax Cable before shipment to ensure the SPT-SFP+C05 (SFP+ to SFP+ 10GB Copper 0.5M Passive Cable AWG30) can work in your system without any problems.

SFP+ to SFP+ 10GB Copper 1M Passive Cable AWG24
SFP+ to SFP+ Passive Twinax Cable 1m AWG24.Sopto is your reliable supplier of SPT-SFP+C1(SFP+ to SFP+ 10GB Copper 1M Passive Cable AWG24). We test each piece of SPT-SFP+C1(SFP+ to SFP+ 10GB Copper 1M Passive Cable AWG24) 10G Copper SFP+ to SFP+ Twinax Cable before shipment to ensure the SPT-SFP+C1(SFP+ to SFP+ 10GB Copper 1M Passive Cable AWG24) can work in your system without any problems.
SFP+ to SFP+ 10GB Copper 2M Active Cable AWG30
SFP+ to SFP+ Active Twinax Cable 2m AWG30. Sopto is your reliable supplier of SPT-SFP+AC2(SFP+ to SFP+ 10GB Copper 2M Active Cable AWG30). We test each piece of SPT-SFP+AC2(SFP+ to SFP+ 10GB Copper 2M Active Cable AWG30) 10G Copper SFP+ to SFP+ Twinax Cable before shipment to ensure the SPT-SFP+AC2(SFP+ to SFP+ 10GB Copper 2M Active Cable AWG30) can work in your system without any problems.

Related Tutorials

Which manufacturers’ twinax cable has a reasonable price and standardized specification in China

Which manufacturers’ twinax cable is better in China The twinax cable has two central copper bodies . Each copper wrapped in vitro a layer of insulating material and this layer of insulation material is surrounded by tightly netlike conductors.   Then, a layer of protective coat will be covered around the two netlike conductors. The performance of 10G copper cable is the same as coaxial cable. The twinax cable has two center copper bodies, but the coaxial cable only has one, which is unlike the UTP.   The transmission of coaxial cable is imbalanced, and the 150ohm coaxial cable is usually called the short haul cable which mainly used in the transmission of gigabit network.

Where can I buy SFP+ direct attach twin-axial cable with low cost

SFP+ direct attach twin-axial cable with low cost . The Direct Attach Cables are the components (includes interface module on both ends) used for the interconnection between the network cards.   The Direct Attach Cables are mainly used in the stacked connection of the 10G Ethernet Switches, the interconnection between the TOR switches and servers, the fiber channel devices, the InfiniBand devices and the interconnection between the servers or the storage devices.   The SFP+ direct attach twin-axial cable is also called 10GSFP+ copper or 10GbE copper SFP+ cable. The Direct Attach Cables use the passive twinax cable components and connect with SFP+ module directly.   The SFP+

SOPTO supplies SFP copper cables with 3 kinds of American Wire Gauge (AWG)

SOPTO supplies SFP copper cables with 3 kinds of American Wire Gauge (AWG) . The SFP copper cable is a new standard high-tech product.   For its high reliability and higher transmission speed, the SFP copper cable is used to manage the communication between the central processor unit (CPU) and the network card and the storage system.     With the function of synchronous multi- machine operation, the SFP copper cable solves the transmission bottleneck of the existing server I/O architecture and maximizes the performance of the processor.   SOPTO supplies high-speed copper cable with the length from 0.5 meter to 12 meter, including CX4 copper cable, SFP copper cable, SFP+
Copyright © 2019 Fiber optic equipment manufacturer in China, SFP, FTTH, fiber converter, cable.