Your Best Partner for Fiber Optic Solutions

The introduction of FTTH drop patch cords

FTTH drop patch cords have been widely applied in Fiber Optic CATV, FTTH, FTTB, FTTP solutions; Local area Networks (LANs) and Wide Area Networks (WANs); Fiber Optic telecommunication systems; Transmission Mode (ATM) and Fiber Optic Backbone.

 

Sopto can supply FTTH drop cable patch cords which are made of standard FTTH fiber optic cabling. It is so easy and convenient to operate in FTTH Constructions; you just need to push the connector to the Adapters.

 

The main features of our FTTH drop cable patch cords are as following:

 

1, Low insertion loss(≤ 0. 20dB)and high return loss(≥ 55 dB)

 

2, So many colors could be chosen that meet your need.

 

3, save operation time, saving the costs, push/pull mating for quick installation

 

You can contact to us for more about FTTH Drop Cable Patch Cords, Price, Product, Description.

FTTH Drop Cable Patch Cords

Sopto FTTH drop cable patch cords are made of standard FTTH fiber optic cabling and are terminated with fiber optic connectors on both ends. It is easy and more convenient to operate in FTTH Constructions, push the connector to the Adapters.

Related Tutorials

Which is more expensive between single-mode fiber optical cable and multi-mode fiber optical cable

Which is more expensive between single-mode fiber optical cable and multi-mode fiber optical cable ?   The fiber optic cable is composed of an optical fiber core, an optical layer and an outer protective layer. The single-mode fiber and the multi-mode fiber both accelerate the speed of information transmission. From the cost of view, the single-mode fiber is more expensive than multi-mode fiber.   Therefore, the single-mode fiber optical cable is more expensive than multi-mode fiber optical cable.   How to distinguish the single-mode fiber and multi-mode fiber from the data on the cable ?   Firstly, there are “A4b, A8b...” and “B4b, B8b, B48B...”

The CWDM power meter with simple operation

The power meter , consists of two parts, the power sensor and the power indicator. The power sensor is also called the power meter probe, which converts the high-frequency signal into the electrical signals that can be detected directly through the power.   The power indicator includes the signal amplification, signal transformation, and the displayer. The displayer shows the power value directly.   It uses the cable to connect the power sensor and the power indicator. In order to adapt to the different frequencies, different power level and the needs of different transmission line structure, a power meter need a number of power meter probes with different function.   Sopto
Copyright © 2018 Fiber optic equipment manufacturer in China, SFP, FTTH, fiber converter, cable.