Your Best Partner for Fiber Optic Solutions

The advantages of the InfiniBand cable

The advantages of the InfiniBand cable. The InfiniBand cable unlimited broadband is a new technical standard, which is applied in managing the communication among the central processor unit (CPU), network cards and storage systems because of its high reliability and faster transfer speeds.

 

QSFP+ Cables

 

Since the InfiniBand has the function of the synchronous multi-machine operation, it can be regarded as a new bus architecture which is developed mainly to replace the existing PCI bus in the server; solve the existing transmission bottleneck of server I/O architecture and display the processor efficiency to the maximum. Therefore, it supports data bandwidth from 500 MB/s to 6 GB/s with 2.5 GB/s line speed.

 

And the QSFP (Quad Small Form-factor pluggable) cable has 4 channel SFP interfaces.

 

The QSFP cable is born to meet the demand of higher-density and high-speed pluggable solution for the market. At present, the QSFP interface has been adopted by the InfiniBand standard.

QSFP+ to 4SFP+ passive cable AWG24,3M

QSFP+ to 4SFP+ 3meter passive cable AWG24. The SPT-QSFP+/4SFP+C3 (QSFP+ to 4SFP+ passive cable AWG24, 3meter) is compatible with all brands including Cisco, Juniper, HP, Extreme, Enterasys, brocade-foundry, H3C, Alcatel-lucent etc.

QSFP+ to 4SFP+ passive cable AWG24,5M
QSFP+ to 4SFP+ 5meter  passive cable AWG24. Sopto is reliable supplier of SPT-QSFP+/4SFP+C5 (QSFP+ to 4SFP+ 40GB Copper 5M Passive Cable AWG24). We test each piece of SPT-QSFP+/4SFP+C5 (QSFP+ to 4SFP+ 40GB Copper 5M Passive Cable AWG24) 40G Copper Twinax Cable before shipment to ensure the SPT-QSFP+/4SFP+C5 (QSFP+ to 4SFP+ 40GB Copper 5M Passive Cable AWG24) can work in your system without any problems.
QSFP+ to 4SFP+ passive cable AWG24,7M
QSFP+ to 4SFP+ 7M passive cable AWG24. Applications: Servers, Routers, Switches Applications. Networked storage systems, External storage systems. Data Center networking. InfiniBand Trade Association (IBTA) IEEE802.3ba. 40Gigabit Ethernet (40G BASE – CR4)

Related Tutorials

Which manufacturers’ twinax cable has a reasonable price and standardized specification in China

Which manufacturers’ twinax cable is better in China The twinax cable has two central copper bodies . Each copper wrapped in vitro a layer of insulating material and this layer of insulation material is surrounded by tightly netlike conductors.   Then, a layer of protective coat will be covered around the two netlike conductors. The performance of 10G copper cable is the same as coaxial cable. The twinax cable has two center copper bodies, but the coaxial cable only has one, which is unlike the UTP.   The transmission of coaxial cable is imbalanced, and the 150ohm coaxial cable is usually called the short haul cable which mainly used in the transmission of gigabit network.

Where can I buy SFP+ direct attach twin-axial cable with low cost

SFP+ direct attach twin-axial cable with low cost . The Direct Attach Cables are the components (includes interface module on both ends) used for the interconnection between the network cards.   The Direct Attach Cables are mainly used in the stacked connection of the 10G Ethernet Switches, the interconnection between the TOR switches and servers, the fiber channel devices, the InfiniBand devices and the interconnection between the servers or the storage devices.   The SFP+ direct attach twin-axial cable is also called 10GSFP+ copper or 10GbE copper SFP+ cable. The Direct Attach Cables use the passive twinax cable components and connect with SFP+ module directly.   The SFP+

The most popular cables based on Gigabit Ethernet Application

The most popular cables based on Gigabit Ethernet Application . The Ethernet protocol is a group LAN protocol defined by the IEEE 802.3 standard. Gigabit Ethernet or 1 GigE protocol is based on the Ethernet protocol, whose speed is increased 10 times based on the fast Ethernet.   Due to its shorter data frame, the carrier extension is added. As a complement of the IEEE 802.3 standard, the Gigabit Ethernet is released by the IEEE 802.3z and the 802.3a.   With the appearance and development of 1 Gigabit Ethernet, all kind of related products emerge as required. And the Sopto’s SFP cables and Gigabit PCI Cards are the most widely used.   The SFP cable which compatible with
Copyright © 2018 Fiber optic equipment manufacturer in China, SFP, FTTH, fiber converter, cable.