Your Best Partner for Fiber Optic Solutions

SFP to SFP cable offers a highly cost-effective way for racks

SFP to SFP cable offers a highly cost-effective way for racks. The SFP to SFP cable is suitable for very short distances and it offers a highly cost-effective way to connect within racks and across adjacent racks.

 

The SFP cable offers a low cost SFP solution and the directly attached twinax cable assemblies support 10 Gigabit Ethernet, Fibre Channel and other industry standards.

 

SFP+ Cables

 

Our twinax cable product includes SFP to SFP cables, SFP+ to SFP+ cables, XFP to XFP cables, QSFP cables, QSFP+ direct attached cables, CX4 cables and Mini SAS cables.

 

Our twinax cable is compatible with the devices of Cisco, HP, H3C, HuaWei, D-Link and Extreme and so on. Before the shipment, we will strictly check to ensure that no quality problem.

SFP+ to SFP+ 10GB Copper 1M Passive Cable AWG30

SFP+ to SFP+ Passive Twinax Cable 1m AWG30. Applications: 1-8G Fiber Channel (1x, 2x, 4x and 8x) and multi-gigabit data rates up to 10.5Gbps (1-10G) Gigabit Ethernet. Networking, Storage, Telecommunications. Hub, Switches, Routers, Servers, Network Interface Card (NICs).

SFP+ to SFP+ 10GB Copper 2M Active Cable AWG30
SFP+ to SFP+ 10GB Copper 2M Active Cable AWG30. Sopto is your reliable supplier of SPT-SFP+AC2(SFP+ to SFP+ 10GB Copper 2M Active Cable AWG30). We test each piece of SPT-SFP+AC2(SFP+ to SFP+ 10GB Copper 2M Active Cable AWG30) 10G Copper SFP+ to SFP+ Twinax Cable before shipment to ensure the SPT-SFP+AC2(SFP+ to SFP+ 10GB Copper 2M Active Cable AWG30) can work in your system without any problems.
10G SFP+ Direct Attach Cable
10G SFP+ Direct Attach Cable. Features: Hot pluggable, Bit rate support from 1G to 11.3Gbps, Pre-terminated twinaxial cable / fiber cable, Operating environment temperature 0 ~ 70℃, Low power consumption, SFP+ housing with enhanced EMI shielding, Single 3.3V power supply, Programmable EEPROM for serial identification

Related Tutorials

The high-performance active optical cable technology for servers

The high-performance active optical cable technology for servers . In response to the rapid growth of the data flow, the data center introduces the active optical cable interconnection technology between the servers whose data rate is more than 10Gbps.   These interconnection technology needs to measure eye diagrams and bit error to overcome the problem caused by the long-distance transmission, high-speed and the high-power to ensure the signal transmission quality.     Our AOC solution provides high performance and speed at one of the lowest levels of power on the market. The Active Optical Cable (AOC) assemblies for QSFP+ and CX4 applications offer an advanced new

The brief introduction of the RF cable assembly

The brief introduction of the RF cable assembly . The RF cable assembly is composed of the RF connector and the RF cable through a suitable assembly process technology.   Because the various types of connectors, types of cables and the length, the there are so many specifications of the RF cable assembly. In addition, there are many classification methods for the RF cable assembly.   For example, the RF cable assembly can be divided into high power RF cable assembly, stationary phase RF cable assembly and high stability RF cable assembly according to the performance.   For other related products information, such as QSFP+ cables, XFP fiber optic transceivers, fiber optic

The advantages of the InfiniBand cable

The advantages of the InfiniBand cable . The InfiniBand cable unlimited broadband is a new technical standard, which is applied in managing the communication among the central processor unit (CPU), network cards and storage systems because of its high reliability and faster transfer speeds.     Since the InfiniBand has the function of the synchronous multi-machine operation, it can be regarded as a new bus architecture which is developed mainly to replace the existing PCI bus in the server; solve the existing transmission bottleneck of server I/O architecture and display the processor efficiency to the maximum. Therefore, it supports data bandwidth from 500 MB/s to 6 GB/s with
Copyright © 2017 Fiber optic equipment manufacturer in China, SFP, FTTH, fiber converter, cable.