Your Best Partner for Fiber Optic Solutions

Protocol Converter

Protocol converters provide physical conversion between ITU-T G.703 standard E1 interface and standard V.35, RS232, RS422, RS485 and 10M/100M Ethernet interface, offering security and seamless link for communication between different devices with different interfaces. Protocol supports IEEE 802.3, IEEE 802.1 P, 802.1Q (VLAN). The interface converter transfers data with V.35, RS232, RS485, RS422 output. E1 interface is compatible with ITU-T G.703, G.704 and G.823 supporting BNC 75Ω/unbalance impedance and RJ45 120Ω/balance impedance with speed rates range of 64K~2.048Mbps. Single and multi E1 and framed E1 (FE1) channels; data interface and Ethernet interface; mini rack and 19 inch rack; 220V, 110V, 48V power supply or both are optional, as well as TDM over IP devices.
 
E1 to Ethernet Converter

Sopto provides multi E1 (1-16) channels to multi ETH (1-4) channels protocol converters. E1 ports are designed as 75ohm unbalanced and 120ohm balanced. Ethernet ports are 10/100Based. Additionally, framed E1 and unframed E1, 110V/220V/ 48V, single power and dual power supplies are optional. For single E1 and multi E1 to optical ETH (FX) converters, dual fiber and single fiber, SC and FC connectors are available. The transmitting distance could be 20km or more.

TDMOIP

4E1-10/100Base-T Protocol Converter serial interface converter used back multiplexing technology, transfer 10M/100M Ethernet data by using multi E1 channels. Realize convert between 1 to 4 E1 channels and Ethernet interface. It can transmit signal of E1 channel to RJ45 interface point to point, realize the connection of E1 channel and Ethernet. 4 channels can up to 7872Kbits/s. it can make use of mass E1 resource in telecommunication networks to expend the transfer distance and application field of Ethernet. It also supports Vlan.

Copyright © 2017 Fiber optic equipment manufacturer in China, SFP, FTTH, fiber converter, cable.