Your Best Partner for Fiber Optic Solutions

Cisco CX4 cable, the low-cost solution for 10Gbase

Cisco CX4 cable, the low-cost solution for 10Gbase. The high-speed Cisco CX4 cable is a kind of 10G Ethernet twin-ax high-speed cable, which meets the IEEE802.3ak protocol standard.

 

The Cisco CX4 cable is used to interconnection between the servers, switches and memory units with maximal connection distance which ups to about 15m. Therefore, Cisco CX4 cable is a low-cost solution for 10GBase.

 

CX4 Twinax Cable

 

The 10GBase-CX4 adopts the InfiniBand 4X standard CX4 connector whose data rate ups to 10Gb/s. The applications of high-speed Cisco CX4 cable include the interconnection between the switches, the switch and the server, the switch and the memory unit, etc.

 

CX4 cable is compatible with InfiniBand downward because of its higher test standard than the InfiniBand cable. However, the Infiniband cable may not meet the test of CX4 cables.

CX4 Twinax Cable

CX4 to CX4 Twinax Cable 1 Meter. 10G CX4 passive copper Cables were developed to provide the fastest transfer rates available links for a wide range of 10Gb/s applications including standards such as 10 Gigabit Ethernet, 10G Fiber Channel, and other network solutions.

Related Tutorials

The QSFP+ to 4 SFP+ cable used for the 40G and 10G devices

The QSFP+ to 4 SFP+ cable used for the 40G and 10G devices . Our QSFP+ to SFP+ high-speed cable assembly is a cost-effective and high-speed connectivity solution for our customers to achieve the interconnection between the 40G device and the 10G device, such as the NIC/HBA/CAN, switches and the servers.   In a typical application, user uses these QSFP+ to SFP+ cables to realize the interconnection between the existing 40G QSFP+ port and 4 SFP+ ports.     The high-speed QSFP+ to SFP+ cable, which is in accordance with the requirement of SFF-8436 and SFF-8432, has a 40Gb/s QSFP+ interface on one end and four 10Gb/s SFP+ interfaces on another end.   We supply QSFP to 4

We supply series of 10G Ethernet cable for IDC and SAN

We supply series of 10G Ethernet cable for IDC and SAN . With the continuous development of the new technology, the endless applications, such as the VoIP, Enterprise Resource Plan (ERP), Customer Relationship Management(CRM) and the video conference, bring a challenge to the network backbone bandwidth.     A growing number of IDC and SAN will deploy the 10G Ethernet in the next few years. And the 10G Ethernet-related products will be in short supply.   The series of 10G Ethernet cable produced by us includes CX4 twin-ax cables, SFP+ cables, XFP cables, QSFP+ cables and Mini SAS cables. And the CX4 cables adopt the CX4 connector to realize the interconnection between the

The cat 6 cable with high signal transmission frequency

The cat 6 cable with high signal transmission frequency . The Category 6 cable is usually called the Cat6 cable. The Cat6 cable is the transmission wire standard used in the gigabit Ethernet and other cat5/cat3 downward compatible networks.   Compared with the Cat5 cable, the Cat6 cable strengthens the protection against the crosstalk and the system noise. And in the specification, the signal transmission frequency of Cat6 cable ups to 250MHz that the Cat6 cable is suitable for many Ethernet transmission standards, such as 10Base-T, 100Base-Tx and 1000Base-T. The Cat6 even can be used as a framework for 10G Ethernet.     For the 10G Ethernet, we supply CX4 twin-ax cables,
Copyright © 2018 Fiber optic equipment manufacturer in China, SFP, FTTH, fiber converter, cable.