Your Best Partner for Fiber Optic Solutions

An introduction of Sopto OTDR

Sopto provides SPT3302 handheld OTDR and SPTH1400 handheld OTDR. The physical description of an OTDR most closely resembles a sort of handheld price scanner with cables attached. The user connects the cables to an optical fiber, in the same way that two drivers will connect vehicle batteries with jumper cables, and then reset the OTDR settings for whatever parameters are being used in the specific test. A typical OTDR test can take anywhere from ten seconds to three minutes.

 

An OTDR takes advantage of the scattering of light in the optic fiber to make its measurements. The OTDR emits a high-power pulse that hits the fiber and bounces back. What comes back is measured, factoring in time and distance, and the result is "trouble spots," which radiate and can be targeted for repair. In general, the data take the form of a wave, with trouble spots clearly visible as aberrations in the wave.

 

Some OTDR systems are equipped with PC-linking capabilities, so that the data recorded during testing can be downloaded to a computer for analysis and storage. Naturally, specific software applications are available for such analysis.

 

Sopto provides SPT3302 handheld OTDR and SPTH1400 handheld OTDR with a special price.You can contact to us for more about OTDR,Price,Product,Description.

Test Equipment

Packet Fiber Optical Light Source/ Economy Optical Light Source/ Optical Light Source PON Optical Power Meter/ Hand Held Optical Power Meter/ Economy Optical Power Meter Multi-purpose Optical Measuring Instruments

Related Tutorials

The function of OTDR

An OTDR ( Optical Time Domain Reflectometer ) is used in fiber optics to measure the time and intensity of the light reflected on an optical fiber.   An OTDR can detect such light loss and pinpoint trouble areas, making repairs easy. The more quickly trouble areas are identified and addressed, the less your fiber optic network will suffer from data transfer problems. More to the point, it is used as a troubleshooting device to find faults, splices, and bends in fiber optic cables, with an eye toward identifying light loss. Light loss is especially important in fiber optic cables because it can interfere with the transmission of data.   The OTDR is not perfect, of course. Critics

Sopto FTTH terminal box for 6 SC adaptors

As we all know FTTH terminal box is an indispensable accessory in FTTH construction. This product is wildly used in FTTH area. Usually Fiber Access Terminal can be used indoor and outdoor, dust proof and water proof. Today I will introduce one of Sopto FTTH terminal box, FTB-106C.   FTB-106C is the upgrade version for FTB-104C, this terminal box is light and compact, especially suitable for protective connection of fiber cables and pigtails in FTTH. Widely used in the end termination of residential buildings and villas, to fix and splice with pigtails; Can be installed on the wall; May adapt variety of optical connection styles; Optical fiber can be managed effectively. And it’s

Introduction of some popular fiber optical connectors, ST, SC, LC, MU, FC, MT-RJ

This article Introduces some popular fiber optical fast connectors .   Firstly, One of a common type of fiber optical connector is the FC/PC . This connector has a pin that connects to the female component and screws tightly into place. Though these connectors have been used for a long time, in 2011, snap-type connectors, such as the LC and the SC connectors are becoming more popular.   Secondly, the ST fiber-optic connector is one of the most common . Major telecommunication companies often use this type of connector because it is easy to install and relatively inexpensive. Loss of data can occur with this type of connector if the cable is misaligned with the female component.
Copyright © 2017 Fiber optic equipment manufacturer in China, SFP, FTTH, fiber converter, cable.