Your Best Partner for Fiber Optic Solutions

6G SFP+ Transceiver 1310nm 2Km

Manufacturer/Supplier: SOPTO

 

The models: SPT-P136G-02

 

Price: Request for quotation from customer services

  • Description
  • Picture
  • Related Products
  • Download
  • Review
  • Write Review

6G SFP+ Transceiver 1310nm 2Km                                                                                                                                                

 

Features

Support Multi Rate up to 6.25 Gbps

CPRI/OBSAI Compatible Optical Interface

Hot Pluggable SFP+ footprint

1310nm FP transmitter, PIN photo-detector

Transmission distance up to 2km on 9/125 μm SMF

 

Digital Status monitoring Interface

Duplex LC connector

RoHS compliant and Lead Free

Metal enclosure for lower EMI

Single 3.3V power supply

Power dissipation <1W

Compliant with FC-PI-4 800-Mx-SN-I, SFF-8431 , SFF-8432 and SFF-8472

 

Operating case temperature:

Standard : 0 to +70℃

Industrial : -40 to +85℃

Product description
SPT-P136G-02 is a high performance, cost effective modules for serial optical data communications such as CPRI and OBSAI, which is supporting Multi Rate Up to 6.25Gbps, and transmission distance up to 2kmon SM fiber.

 

product description

The transceiver consists of two sections: The transmitter section incorporates a 1310nm FP driver Andre-timer. The receiver section consists of a PIN photodiode integrated with a Trans impedance preamplifier (TIA). The module is hot pluggable into the 20-pin connector. The high-speed electrical interface is based on low voltage logic, with nominal 100 Ohms differential impedance and AC coupled in the module.

 

Optical characteristics

Parameter

Symbol

Min.

Typical

Max

Unit

Notes

Transmitter

Center Wavelength

λt

1284

1310

1345

nm

Note1

RMS spectral width

Pm

-

-

1

nm

 

Average Optical Power

Pavg

-6

-

-0.5

dBm

Note1

Laser OffPower

Poff

 

-

--30

dBm

 

Extinction Ratio

ER

3.5

 

 

dB

 

Relative Intensity Noise

Rin

 

 

-128

dB/Hz

 

Optical Eye Mask

Compliant with IEEE 802.3ae

Single Ended Output Voltage
Tolerance

 

-0.3

 

4

V

 

Common Mode Voltage Tolerance

 

15

   

mV

 

Tx Input Diff Voltage

VI

180

 

700

mV

 

Data Dependent Input Jitter

DDJ

   

0.1

UI

 

Data Input Total Jitter

TJ

   

0.28

UI

 

Receiver

Center Wavelength

λr

1260

-

1360

nm

 

Receiver Sensitivity

Psens

-

-

-15

dBm

 

LOS Assert

Los

-30

-

 

dBm

 

LOS De-assert

LosD

   

-16

dBm

 

Los Hysteresis

LosH

0.5

   

dBm

 

Overload

Pin

0.5-

-

 

dBm

 

Stressed Eye Jitter

 

-0.3

-

 

UIp-p

 

Receiver electrical 3dB upper
cutoff frequency

     

12.3

GHz

 

Vertical Eye Closure Penalty

 

2.2

   

Db

 

Single Ended Output Voltage
Tolerance

 

-0.3

 

4

v

 

Rx Output Diff Voltage

Vo

450

 

850

Mv

 

Rx Output Rise and Fall Time

Tr/Tf

30

   

PS

 

Total Jitter

TJ

   

0.7

UI

 

Deterministic Jitter

DJ

   

0.42

UI

 

Stressed Receiver Sensitivity in
OMA

     

-10.3

dBm

 

Receiver Reflectance

 

 

 

-12

dB

Note3

 

Description 2

SPT-P136G-02 is a high performance, cost effective modules for serial optical data communications such as CPRI and OBSAI, which is supporting Multi Rate Up to 6.25Gbps, and transmission distance up to 2kmon SM fiber. The transceiver consists of two sections: The transmitter section incorporates a 1310nm FP driver Andre-timer. The receiver section consists of a PIN photodiode integrated with a Trans impedance preamplifier (TIA). The module is hot pluggable into the 20-pin connector. The high-speed electrical interface is based on low voltage logic, with nominal 100 Ohms differential impedance and AC coupled in the module.

 

FAQ:   Payment Method      Logistics costs    Guarantee     Return Policies

 

Same Class Products:

 

6G 1310nm 40Km SFP+ Optical Transceiver

6G 1310nm 10Km SFP+ Optical Transceiver

6G 850nm 300m SFP+ Optical Transceiver

 

Q&A

------------------------------------------------------------------------------------------------------------------------

Q: What is application of the fiber optic transceiver?

 

A: D / T: means Datacom / Telcom. Data communications mainly include computer video, data communications and so on. Telcom includes wireless voice communication and so on.

 

Such products are used for backbone network of fiber optical network.

 

PON: passive optical network refers to passive optical networks. Such products are mainly used in access network of fiber optic network system. One of the triplex products can not only transmit fiber optical signal, but also can output analog signal.

 

Optical modules, divided into: GBIC, SFP, SFP+, XFP, SFF, CFP, etc., Optical interface types include SC, LC and so on. But now commonly used modules are the SFP, SFP +, XFP, rather than GBIC. The reason is that GBIC is large and easily broken. SFP is now commonly used because its small and cheap.

 

Type: Single-mode optical module is suitable for long distance transmission; multi-mode optical module is suitable for short-distance transmission.

 

Action: Optical module for transmission between the switch and equipment, more efficient and security compared to the transceiver.

Copyright © 2017 Fiber optic equipment manufacturer in China, SFP, FTTH, fiber converter, cable.