Your Best Partner for Fiber Optic Solutions

10G DWDM SFP+ Transceiver 80Km

Manufacturer/Supplier: SOPTO

 

The models: SPT-PD (17-61) TG-80D

 

Price: Request for quotation from customer services

  • Description
  • Picture
  • Related Products
  • Download
  • Review
  • Write Review

10G DWDM SFP+ Transceiver 80Km    

 

Features

 

  • Compliant with SFF-8431, SFF-8432 and IEE802.3ae
  • 10GBASE-ZR, and 2G/4G/ 8G/10G Fiber Channel applications.
  • Suitable for use in 100GHz channel spacing DWDM systems
  • Cooled EML transmitter and APD receiver link length up to 80km (with amplifier)
  • Low Power Dissipation 1.4W Typical (Maximum:2W)
  • -5ºC to 70ºC Operating Case Temperature
  • Single 3.3V power supply
  • Diagnostic Performance Monitoring of module temperature, supply voltages, laser bias current, transmit optical power, receive optical power
  • RoHS6 compliant and lead free

 

Applications

 

  1. 10G Ethernet
  2. 10G Fiber Channel (with/without FEC)

 

Primary Competitive Advantages:

 

1. Compatible with Cisco, HUAWEI, ZTE, Ericsson, Juniper, 3COM, Nortel, H3C, HP, Alcatel, D-link, Ruijie, Linksys……..

2. Green Product

3. Reasonable Price

4. Good Service

5. High Product Performance

6. 3 Years Warranty

7. High quality CE, FCC RoHS certificate

8. Good logistics

9. OEM and ODM are available

 

Transmitter Specifications – Optical

 

Parameter

Symbol

Min

Typical

Max

Unit

Center Wavelength-Start of Life [1]

ëλc

λc -25

ëλc

ëλc +25

pm

Center Wavelength-End of life [1]

λc

λc -100

ëλc

λc +100

pm

Spectral Width (-20dB)

Δλ20

-

-

0.3

nm

Average Optical Power [2]

Po

-1

-

+3

dBm

Side Mode Suppression Ratio

SMSR

30

-

-

dB

Optical Transmit Power (disabled)

PTX_DISABL E

-

-

-30

dBm

Extinction Ratio

ER

9

-

-

dB

Relative Intensity Noise

RIN

-

-

-128

dB/Hz

Optical Return Loss Tolerance

Orl

-

-

21

dB

Notes:

1. Wavelength stability is achieved within 60 seconds (max) of power up.

2. Minimum OMA = -2.4 dBm

 

Receiver Specifications – Optical

Parameter

Symbol

Min

Typical

Max

Unit

Input Operating Wavelength

λ

1260

-

1620

nm

Receiver sensitivity(Average) [1]

Rsen

-

-

-24

dBm

Maximum Input Power

RX-overload

-

-

-7

dBm

Loss of Signal Asserted

Lsa

-34

-

-

dBm

 

LOS De-Asserted

 

Lda

 

-

 

-

 

-24

 

dBm

LOS Hysteresis

Lh

0.5

-

-

dB

Notes:

[1] Measured with conformance test signal for BER = 10–12. The stressed sensitivity values in the table are for system level BER measurements which include the effects of CDR circuits. It is recommended that at least 0.4 dB additional margin be allocated if component level measurements are made without the effects of CDR circuits.

 

Transmitter Specifications – Electrical

Parameter

Symbol

Min

Typical

Max

Unit

Data Rate

Mra

-

10.3

11.3

Gbps

Input differential impedance

Rim

-

100

-

Ω

Differential data Input

VtxDIFF

120

-

850

mV

Transmit Disable Voltage

VD

2.0

-

Vcc3+0.3

V

Transmit Enable Voltage

Ven

0

-

+0.8

V

Transmit Disable Assert Time

Vn

-

-

100

us

 

Receiver Specifications – Electrical

Parameter

Symbol

Min

Typical

Max

Unit

Data Rate

Mra

-

10.3

11.3

Gbps

Differential Output Swing

Vout P-P

350

-

850

mV

Rise/Fall Time

Tr / Tf

24

-

-

ps

Loss of Signal –Asserted

VOH

2

-

Vcc3+0.3-

V

Loss of Signal –Negated

VOL

0

-

+0.4

V

 

FAQ: Payment Method        Logistics costs         Guarantee         Return Policies

  

Same Class Products:

 

10G 40Km DWDM SFP+ Optical Transceiver

6G 40Km DWDM SFP+ Optical Transceiver

 

Q&A

-------------------------------------------------------------------------------------------------------------------

Q: What is sfp+ transceiver?

 

A: SFP+ (SFP Plus) is an innovative, next-generation transceiver module. Initially, it is targeted to support speeds of 10 Gbps for next-generation Gigabit Ethernet applications. It is smaller than any of the currently shipping form factors and provides the highest density per line card.

 

SFP+ Transceiver is interchangeable with SFP transceiver and can be used in the same cages as SFP transceiver. For 10G applications, SFP+ transceiver has a smaller footprint and lower power consumption than XFP transceiver. The electrical interface to the host board for SFP transceiver and SFP+ transceiver is the same serial.

 

 

Q: Where can i buy the SFP+ Transceiver?

 

A: Sopto is an original manufacturer of SFP+ transceiver, we have sufficient transceiver modules in stock, and ready to ship upon your request. We have 8 years experiences in offering SFP+ transceiver, we can provide 3 years warranty as well as life time technical supports for SFP+ transceiver.

 

Every transceiver module will be tested before shipping, we guarantee all of our SFP+ transceiver can be 100% compatible with your networking devices. We have an efficient logistics that we will deliver our goods on time. We offers a sample for our customer to better know our products.

Copyright © 2017 Fiber optic equipment manufacturer in China, SFP, FTTH, fiber converter, cable.