Your Best Partner for Fiber Optic Solutions

10G BIDI XFP Transceiver 1270/1330nm 10km

Features

  1. Supports 9.95Gb/s to 11.1Gb/s bit rates
  2. Hot-pluggable XFP footprint Maximum link length of 10km with SMF
  3. 1270nm DFB laser Transmitter and 1330nm Receiver
  4. XFP MSA package with LC connector
  5. No reference clock required
  6. Loop Back Support.
  7. +3.3V, +1.8V power supply
  8. Power dissipation <2W
  9. Compatible with RoHS
  10. Built-in digital diagnostic functions
  11. Temperature range 0°C to 70°C

 

Applications

  1. 10GBASE-BX 10G Ethernet
  • Description
  • Picture
  • Related Products
  • Download
  • Review
  • Write Review

10G BIDI XFP Transceiver 1270/1330nm 10km

                                                                                                                          

Description

 

SPT-XB2733TG-L10D is compliant with the IEEE803.3ae 10Gbase-Bx and transmission distance up to 10km on SMF.

 

The transceiver module comprises a transmitter with a 1270nm DFB laser transmitter, an integrated 1330nm detector preamplifier (IDP) mounted in an optical header and a limiting post-amplifier IC.

 

Transmitter and receiver are separate within a wide temperature range of 0°C to +70°C and offers optimum heat dissipation and excellent electromagnetic shielding thus enabling high port densities for 10 GbE systems.

 

Any stress beyond the maximum ratings can result in permanent damage. The device specifications are guaranteed only under the recommended operating conditions.

 

Parameter

Symbol

Min.

Typ.

Max.

Unit

Note

Transmitter

Average Launched Power

PO

-5

-

0

dBm

 

Average Launched Power(Laser Off)

POUT-OFF

-

-

-30

dBm

Note (1)

Center Wavelength Range

λC

1260

1270

1280

nm

 

Side mode suppression ratio

SMSR

30

-

-

dB

 

Spectrum Bandwidth(-20dB)

σ

-

-

1

nm

 

Extinction Ratio

ER

3.5

6

-

dB

Note (2)

Output Eye Mask

Compliant with FC_PI_4 REV 7.0

 

Note (2)

Receiver

Input Optical Wavelength

λIN

1320

1330

1340

nm

 

Receiver Sensitivity

PIN

-

-

-15

dBm

Note (3)

Input Saturation Power (Overload)

PSAT

0.5

-

-

dBm

Note (3)

LOS -Assert Power

PA

-30

-

-

dBm

 

LOS -Deassert Power

PD

-

-

-18

dBm

 

LOS -Hysteresis

PHys

0.5

-

4

dB

 

 

Q&A

-----------------------------------------------------------------------------------------------------

Q: What is WDM?

 

A: WDM is short for Wavelength Division Multiplexing. WDM is a fundamental passive optical component for optical system. Through one WDM can multiplex different wavelengths of light over a single, installed multimode network to add bandwidth.

 

 

Q: What is feature of WDM?

 

A: Based on its special physical feature, for example, a fused dual-channel WDM will be able to double the data transmission bandwidth at very low cost. Also, WDM offers an attractive solution to increasing LAN bandwidth without disturbing the existing embedded fiber, which populates most buildings and campuses, and continue to be the cable of choice for the near future.

 

 

Q: What is superiority of WDM?

 

A: The technology makes flexible and efficient planning of optical networks possible for satellite, broadcast, instrumentation and signal distribution. In general, This technology offers particular benefits when installing new channel capacity into a pre-existing fiber network with a fixed number of fiber cores in the backbone. it allows to expanding the capacity of your network without laying more fibre and having to recondition all network.

Copyright © 2017 Fiber optic equipment manufacturer in China, SFP, FTTH, fiber converter, cable.