Your Best Partner for Fiber Optic Solutions

1000BASE-T Copper GBIC Transceiver

Features

  • Hot-pluggable GBIC footprint
  • Extended case temperature range (0°C to +70°C )
  • Fully metallic enclosure for low EMI
  • Low power dissipation (1.05 W typical)
  • Compact RJ-45 connector assembly
  • Access to physical layer IC via 2-wire serial bus
  • 1000 BASE-T operation in host systems with SGMII interface

Applications

  1. 1.25 Gigabit Ethernet over Cat 5 cable
  • Description
  • Picture
  • Related Products
  • Download
  • Review
  • Write Review

1000 BASE-T operation in host systems with SGMII interface                                                                                                                

General Specifications                                                                                                                                                                 

General

Parameter

Symbol

Min

Typ

Max

Units

Notes/Conditions

Data Rate

BR

10

 

1,000

Mb/sec

IEEE 802.3 compatible.

See Notes 2 through 4 below

Cable Length

L

 

 

100

m

Category 5 UTP. BER <10-12

Notes:

1. Clock tolerance is +/- 50 ppm

2. By default, the SPT-GE-T1 is a full duplex device in preferred master mode

3. Automatic crossover detection is enabled. External crossover cable is not required

4. 1000 BASE-T operation requires the host system to have an SGMII interface with no clocks, and the module PHY to be configured per Application Note AN-2036. With a SERDES that does not support SGMII; the module will operate at 1000BASE-T only.

Copyright © 2017 Fiber optic equipment manufacturer in China, SFP, FTTH, fiber converter, cable.